Recent content by t121anf

no its not, only meter, the plumber (reputable one too) said it should be a problem, its only being raised by a foot. on a second look, its the outlet of the meter that would be changed not the inlet, the anaconda would still be long enough.

i want/need to move my gas meter to allow for a support cupboard to be built. i have asked a plumber about this and he has said it can be done but i need to source a piece of pipe as for him to buy a length would be uneconomical (rest would be left to waste i guess) i got my vernier out...

pipes are all 15mm.

well i googled bleeding veritcal radiators and found nothing. as i say it does heat up to silly hot just does it slowly in comparison to the other one. why would one have a label for top if there isn't a right way round?

before xmas i took delivery of this radiator from B and Q...

so insulation on top of the board it is.

When we moved in I needed to store some stuff up in our loft. at the time the loft had approx 150mm of insulation in and I boarded over this with boards screwed direct to the beams I've taken advantage of nPowers insulation offer and now have 30 rolls of insulation waiting to be fitted to...

ok thanks all for the responces. i did consider leaving them on as they draw less than my V+ box.

i would like suggestions to create a hedge thats both attractive and "secure". just want to keep the kids in our street at bay?

got any links to said timers so i know what to look for?

so what about replacing the switch with one of these? http://cgi.ebay.co.uk/Socket-Box-Electricity-Timer-7-Day-Mechanical-T101-C_W0QQitemZ190254688322QQcmdZViewItem?hash=item190254688322&_trksid=p3286.c0.m14&_trkparms=72%3A1301|66%3A2|65%3A12|39%3A1|240%3A1318 as its box mounted it should...

what would adding a broken 50w hologen lamp do?

i wish to use a security lighting controler to turn my porch lights on and off. at the moment i have one of these wired in http://www.maplin.co.uk/Module.aspx?ModuleNo=37966 but i am tempted to swap to a motion based one like this http://www.maplin.co.uk/Module.aspx?ModuleNo=45045...

no chance then as the box was flush with the tiles. got the box out, will drill the wall and start chipping carefully tonight

is it possible to fit a shaver socket into a 35mm deep box? unfortunately i didnt realise that i should have fitted a 47mm box (b and q dont seem to sell these) if not i guess i will have to try and get the box out and chip more brick work away without damaging the rest of the bathroom...