Recent content by Tedpetal18

Thank you the trip switch has been checked and is all fine. I’ll find out where the other 2 are. Thanks so much

Thanks John, yes as I had it running fine. The wheels were spinning perfectly. Then I assembled the scooter, sat on it went to go outside and it stopped. Now won’t turn on. I have spent another 4 hours today watching videos and check various connections & fuses with the multi meter. I’m now...

Hi Harry ok so I Harlow tested the batteries they are both reading 13.0v which is what they should be according to the video I watched. I’m feeling a bit hopeless but also determined to fix it. Any advice greatly appreciated. Thanks

Thank you know I haven’t, I have a multi meter but no idea what I’m doing. I think I’m going to have to give up with it.

Hi batteries are fine. Nothing is turning on at all now. I had the motor and electromagnetic brake all working I went to take it outside and it stopped within seconds. I turned it off and it hasn’t turned on since. I checked the wiring on the electro brake and one of the pins had snapped off...

Thanks so much I have tried everything today. I bought some spade connectors. The scooter still isn’t turning on I’ve changed the fuse but still nothing. Thanks for you help with the micro switch I appreciate you taking the time to reply x

Hi SUNRAY yes new and old switches have C No NC the wires were connected to C and NC

Thank you! I guess it a continuing loop once connected. Thanks for taking the time to reply.

thank you

I am asking for help from an electrician/engineer, I hope that resolves your curiosity on that part. The scooter is a sterling sapphire 2 I don’t know the year. I will add some more photo’s showing the brake model & micro switch number. I do hope you can help. It’s a 3A/250V 3 pin switch...

Hi all I have a mobility scooter which suddenly stopped working. The soldering from one of the wires in the brake micro switch had come away. I have ordered a new 3A/250v micro switch which has 3 pins. I think I need to solder onto the 2 outer pins. What I need to know is which wires do I...