terryplumb's latest activity

  • T
    terryplumb replied to the thread Hot water expansion tank overflow dripping.
    When system is cold where is the water level up to in the f&e cistern ? It only needs to be a few inches deep. The system sounds like...
  • T
    terryplumb replied to the thread Radiator pipes.
    Yes. Pipe clips would retain the positions. Saddle clips would be my preferred option.
  • T
    terryplumb replied to the thread Ceiling light wiring.
    If you can't re set the breaker with the wiring as it is in your picture ,there is either a fault elsewhere or with the wiring...
  • T
    terryplumb replied to the thread Radiator pipes.
    It's certainly doable to use angled valves ,but you need to be very accurate in positioning the pipework. If your not confident ,use the...
  • T
    terryplumb replied to the thread Megaflo immersion elements replacement.
    Unvented cylinders and their associated parts should be serviced annually . Only plumbers that are G3 certified can do this. I suggest...
  • T
    terryplumb replied to the thread Towel Rail.
    Is the spindle a permanent part of the radiator ? If so the part that appears to be fixed to the wall may just be a cover that unscrews...
  • T
    terryplumb replied to the thread Towel Rail.
    Looks like there is an off set bush ( to allow for alignment / final positioning )between the "spindle" of the radiator and the bracket...
  • T
    terryplumb replied to the thread Towel Rail.
    Are there grub screws on the underside of the brackets ?
  • T
    terryplumb replied to the thread Weird shower issue - no water!.
    Just close your mains cold water stopcock ,and see if bathroom cold taps are still running ,if they do they are tank fed. Turn the...
  • T
    terryplumb replied to the thread Weird shower issue - no water!.
    What model of electric shower is it ?? Does it only have one water pipe going into it ?
Show older items
Back
Top