Recent content by TexanRob

first time I have used the forum and it turned out to be really useful! Properly at my wits end and you guys helped! Thanks again

Thanks Terry for making take a second (proper) look. Your diagnosis was spot on. Got a new valve body and now up and running. Great advice!

Hi Terry - I will take a look at the valve and see what is going on - I get the logic - May take me a day or to sort out - I will come back to this thread. If there any other ideas out there then please feel free to add to this conversation - Thank you for the help:giggle:

Hi Terry - If I put the valve into manual the system still does the same - I have removed the motor from the valve and can confirm that it is rotating when i call for heat and I have also then moved the valve manually and it seems free - Also the heating did run for two hours when the pump was...

Hi Terry - yep it is short run before pipes disappear under the floor. There is heat maybe 3-4 inches past the valve but the pipe just before it goes under the floor is noticeably cooler. I reckon the total run from valve to floor is around 8-10 inches of pipe work TexanRob

Pump is installed correctly flowing to the motorised valves too- I have bled each radiator - clear water in the header tank etc

Hi Stuckinarut, I am with you - I think it could be an airlock. When I have the pump in the original installed condition then hot water is fine but not the heating. Checked the motorised valves too they are working. I am completely baffled at this point in time

Hi all I am i need of a bit of help. i have an oil boiler - working fine. Hot water is running, heating normally however the sequence of events has meant no central heating 1 new pump fitted - damaged due to contamination 2 heating working fine for 3-4 days 3 drained system , put x800...