Hi there Tony
Been keeping an eye on the pressure but looks like still losing a small amount now. I pressurised to 1bar yesterday and it is now just under 1bar.
The boiler is in the loft (don't ask!!) and the PRV pipe exits pretty high up so I'd rather not get up there if I can avoid it...
Thanks for that Tony.
Did the PV today and all went OK.
Boiler is now no longer hitting 3psi and seems much happier now around 1.5 at 75deg. I monitored it for an hour and the PRV pipe seemed to remain cold the whole time.
Will monitor the system for a few days and fingers crossed no...
Thank you so much everyone for your responses. I've read through the FAQ and it makes sense on the whole. I just have a couple of questions:
- When opening the drain point do you need to open all valves up on the rads and then open the bleed valves or can you just literally open the drain...
Hi folks
We have a Vaillant ThermoCOMPACT 637. It is about 8-9 years old.
When using the heating for the first time last week I checked the boiler and noticed that the pressure was nearly zero.
Having been reading various threads here and from watching the boiler this morning I think I...
What I have been doing is measuring in the bottom corners of the (white) rads and aiming for 10-12 deg drop. Seems to work pretty well - I accept it won't be super accurate.
Ok. I'll need to get some black tape though to do what you suggest.
In the meantime, does the boiler behaviour seem...
Hi everyone
I have a Vaillant thermoCompact 637E. If I set the flow temp on the boiler dial to say 67 it only gets up to 61/62 on the display. If I set it to say 72 it sits around 65/66. I've balanced the system and aimed for around 10-12 deg differential on the rads. When checking the...