Recent content by Thermoking

I purchased a new battery from Screwfix (check the existing battery rating and physical size to make sure that you get the correct one). Took the back of the alarm junction box (this sets off a tamper alarm on the main alarm panel), put in your alarm code to silence this. Take out the old...

Many thanks for the reply, I did ask the original alarm installer if they would come and check out the fault before I posted this note but they wanted £90 call out-plus parts (Securifix). I did speak to someone regarding the 'manager code' for this type of alarm and he suggetsed trying 9999 or...

Thanks for the info, I will get a replacement battery. Will the alarm fault LED and the 'call engineer' message then disappear or do I have to enter an 'engineer code' to reset the alarm? If so does anybody know the engineer code (I know the 'manager code for this system)? many thanks...

I have a Euro Meridian alarm system (circa 2003) that has thrown up an alarm fault "call engineer low volts 100", the alarm tamper light is also illuminated. The battery checks out at about 13.5 volts and the voltage into the circuit board from the mains transformer is 20V (mains all OK). The...