Hi.
I recently had some taps replaced in bathroom. The plumber couldn't access the iso value to shut off hot and cold feed to the taps so had to shut off cold mains. Since then, the water system has not been right. For example, when in the shower (electric) and someone turns on another tap in...
Thanks very much for this. Really helpful. It was the kitchen company that fitted this so would have hoped they knew what they were doing.
Thanks again
Hi.
Have recently had a new kitchen fitted and the new dishwasher makes a loud gurgling sound from sink/u bend when draining. Attached is a photo of the setup. Is there anything that can be done to stop this?
Thanks
I have recently had the taps in my bathroom replaced. They had to switch the water off at the mains as the iso values under the sink was difficult to get to. Since then, when the kitchen sink mixer tap is used, after it is switched off, there is a loud short bang from the bathroom. It never used...
After some advice. I went into the loft at the weekend and notice one of the beams was wet. I wen't and took a closer look as checked the membrane. All seemed to be OK. I inserted some flashband in between the beam and the existing felt and also silicone down the sides. Went up to loft again to...
After some advice. I went into the loft at the weekend and notice one of the beams was wet. I wen't and took a closer look as checked the membrane. All seemed to be OK. I inserted some flashband in between the beam and the existing felt and also silicone down the sides. Went up to loft again to...
Hi,
I had a new composite door fitted in August last year and apart from a draught around the latch area (will get onto this shortly) the door opened and closed perfectly. However, around Jan time, when I closed the door (without lifting handle up), the latch engaged into the keep but I could...