Recent content by timmy567

My washer warranty ran out last month and it decided to break down this month - just my luck! :( Washer made a rumbling noise as if a coin was jammed somewhere in the mechaninsm when it was on spin cycle. I let it finish it's load and left it a week until I had some free time to...

Thanks, I'll need to get a Sparky in anyway as I will need a Helny box fitted to fit the Shower consumer unit and I cannot turn off the mains power to do this. I'll speak to my electrical supplier regarding the main fuse rating also.

Just checked my supply is only 60Amps fused prior to the meter. So the manufacturers recommended 50Amps will have to do. No moint in having a 63Amp MCB.

I was just trying to go by the manufacturers instructions. Seems to be a bit of a misfit as the biggest electric showers you can get are 10.5 kw so I don't think a shower kit is made for a 12kw. I thought a 50A MCB would suit better than a 63A MCB?

Looking to replace an electric shower with a 12kw multi-flow instantaneous water heater from Heatstore. I've removed the old electric shower and all the wiring (cable far too small - needs 10mm2) and MCB from the consumer unit and was looking to procure all the parts required for the Heatstore...