Recent content by TimSteer

Hi, I would greatly appreciate some help and advice please. I woke up yesterday to a cold house and after talking to a "friend" who is a plumber to help diagnose the problem we stated on a diagnostic route. I checked that there was no voltage at the bolier despite the central heating...

Well is the Magic White renowned for not being that good..Where it has dried (and is not on top of the filler) it doesn't seem as bright as the rest of the white matt which a decorator used about 3 years ago..which is worrying..

Thank you very much for that...I'll wait until tomorrow to make sure the emulsion is totally dry and then I'll slap on some undercoat..I'm sure I've got osme in the garage..Whats the recommended matt white emulsion to use for a nice bright white finish? Thanks Tim

Thanks, so just cover the are I have filled with that and then when I put the white matt emulsion on top I won't be able to see any demarkation where the undercoat or filler was? I hope it is that simple. Thanks for your advice Tim

Hi Everyone, I have a bit of a problem in that the ceiling of our bedroom, which is angled as it extends into the angle of the roof, had some largish cracks in it. As I thought there might be some movement there I decided to use some "Polycell Flexible Gap PolyFilla" which came in a blue tube...

Hi, Many thanks for the reply...I now know that the model number of the machine is WF02466GB So I am trying to find out exactly what pup it will have. When you say that there is a small locking tab that needs to be moved you can't send me a link to any diagrams can you so I know what to look...

From what I could see it looks exactly like this pump: http://cgi.ebay.co.uk/BOSCH-ASKOL-DRAIN-PUMP_W0QQitemZ160282791829QQcmdZViewItem Does it really just simply unscrew? Thanks Tim

Hi, My Neighbour asked me to have a look at his washing machine as he could not remove the pump filter..It only turned 3/4 of a turn and is jammed. I did some research and found out that I can get to the pump and housing from under the machine which I did and after removing the hoses I managed...