Recent content by timsterboss

I think there is DPC as other walls are fine, the single brick wall is connected to the conservatory, it was connected to the external wall before and then now there's conservatory.

Hello, I took out the plasterboard and seen some damp on timbers.. what would be the best solution for this? Wall then 3 timbers, single wall. Noticed some damp on the other side

Hello, There is some gap between insulation and the joists, would this have significant effect? It is a flat roof connected to a pitched roof. Thanks

Does a beam need insulation?

There was a leak before but no more leakage now

Thinking to use click

It seems the steel beams had no insulation.. should I insulate the beam before I seal it with plasterboards?

Underneath concrete I found some plastic things, seems like a damp proof membrane. So the tiles off and then self leveller is the only option??

Wall above is an ensuite but wall left is external.. Thanks

Hello, before installing LVT I need to even out the concrete floor but it's difficult how I should proceed.. Should I use self levelling compound or concrete + sand?? Thank you The first picture - 2 to 4mm gap between lounge and dining room The second picture - 8 to 12 mm gap between kitchen...

Hello, today I've seen some patches on plasterboards and it was getting wet without any leakage. Upon further investigation, condensation on steel beems were seen.. before plastering it over, please can someone recommend what it needs to be done? (Appreciate if you can give me a name or link to...

Hello, before installing LVT I need to even out the concrete floor but it's difficult how I should proceed.. Should I use self levelling compound or concrete + sand?? Thank you The first picture - 2 to 4mm gap between lounge and dining room The second picture - 8 to 12 mm gap between kitchen...

Hello, today I've seen some patches on plasterboards and it was getting wet without any leakage. Upon further investigation, condensation on steel beems were seen.. before plastering it over, please can someone recommend what it needs to be done? (Appreciate if you can give me a name or link to...

Reassuring thanks!! So there is a solution to get the angles worked out but I guess this is costly and no point in terms of structural changes, and only just for visual effects. Yeah, poor construction seems wrong since it survived for decades. This idea sounds great too thanks

Thanks, that's more assuring. The surveyor said the movement is due a settlement of the extension with the poor construction.. but surely need to be angled so I was confused. Birdsmouth? Do you mean the roof where the fascia is?