Recent content by TINKER77

yes i think so..., time for a look at Which?. thanks for all your help.....

yes we inherited it with the house, i guess its about 15 yrs old. its total silence on all but PRE-WASH....when you do hear the drain pump...

Thanks Zipper. i sent the pcb to QER ltd http://www.qer.biz/servReps.htm i receved a note on return saying "sorry unable to repair, No fault found. No full test, hence my comment about incomplete... Your comment about the pressure switch is interesting, but I am bothered by the fact that the...

ok tried a couple more things. ran prewash with the water feed disconnected. solenoids seem to work ok, and i can just about blow through the water feed pipe when the valves are open. drain pump runs fine. small amount of discolouration on base plate from a drain tube that empties onto it. but...

Ok I emptied the cabinet before I tipped it over.....NO water came out... When i try to run the machine, its completely silent on all but prewash. :?

Thanks Zipper, i can tell you each time that i have laid the m/c down to work on it water HAS come out, (approx 2 pints ish) i had assumed this was from the separator arrangement in the m/c sidewall. the float switch seemed dry so i wasn't concerned. i'll look more carefully and get back to...

great thanks ! the flashing lights are; WASH/RINSE DRYING END the on light remains steady. the others flash simultaneously once per sec and continuously....

Hi everybody, my Miele G676 is being temperamental ! when i try to run it the indicator lights flash on the front panel. it had been doing this on and off for a few months but now wont run on anything but pre wash. I've tried cleaning the filter inside the cabinet. ive checked the drain...