I've sent this "Hi, thanks for sending the washing machine board out so quickly, unfortunately though it doesn't seem to work. The water isn't heating up on any of the cycles when it s installed. I've put the old one back in and that is working better than the new one. Could you advise what I do...
Done a few washes now. Turned the machine off then back on, lights flash for about 20 seconds then stop so haven't had the chance to use the hair dryer on it yet.
With respect to the part that seems to be faulty, should I contact the seller and say I think it's faulty or just ask to send it...
Soooo, it's heating up so that's good, don't have a faulty heating element.
It's making the same noise as the new board tho so that's puzzled me a bit, it's like a robotic type rattling noise and it's during the 'rinse and spin' cycle, what's more weird is it's in time with the water draining...
Okay so old board is back in, this also makes a 'power' type noise, it's only very quiet, my head is right next to the board to hear itso im thinking maybe I have over active hearing?!
As soon as I powered up all lights were flashing, switched it off at the wall and back on, no lights...
Yeah that would be great, if you don't mind. I'll try the old board tomorrow see what that does and then Monday I'll post some pix of the meter. Cheers :)
Will do. I'll ask the hubby to ask they guy who were borrowing it off on Monday how to use it and I'll check google there's sure to be a few vids on there, could pop in to the local B&Q too. Thanks again, will keep you posted!
Thank you, that's a very kind offer :) however one of my friends has come good, I am borrowing a meter on Monday, I'll have to message you when I get it if that's okay cos haven't got a clue what to do with it!
Just re-read your message, I read it wrong in the first place, I wonder if the new board is faulty then :/ I think I might just give up a get a new one! Are there any reliable makes you could recommend? I read earlier to avoid hotpoint / Indesit.
I'll check the 95deg and report back.
Yeah still hear the noise too. Got behind it this morning and even when there's just power to it but it's not actually washing or spinning the board I replaced makes a continuous noise, very quiet but it's there, you know like a power type noise, not sure...
I've got a 30deg fast wash on at the moment, I figured if the water wasn't heating what's the point of using a higher wash (I've got stuff in that really only needs a quick wash). When that's finished I'll try a 95deg wash because maybe I just felt the glass when it was rinsing? I'm sure before...