Recent content by Tommer

Softus, Thanks for the speedy responce, also for your pearls of wisdom, As for wasting your time I must appoligise as you must have tons of work on but still find time to write a small story about my situation. Again I must appoligise for bleating on but as you know more about me that any...

Gents, Its me again, I have followed your instruction to the letter and here is my findings after removing the rads. opend TRV side no problems good flow of water, opend the other valve just a small amount of water, I then removed the valve completley with the heating on, still the flow was...

Softus Point taken will remove the rads and report back as to the findings. However if the valves are found to be OK what is the next step?

Deso13 Will do, will let you know the out come,Thanks

Softus, I thought I would be getting the same result by closing the valves and opening the bleed screw and then opening one valve at a time. as apposed to removing the rads. I thought that if the bleed screw discharged water then the valves must be ok?

Well closed both rad valves and then opened one at a time and at the same time opened the bleed screw water was venting so that tells me the valves are OK. Can any body tell me what to try next as they still don't get hot although the one in the small room has got slightly war but not hot and...

kevplumb, Thanks for the advise, I have tried to contact the guy today with no luck will keep on trying but in the mean time i am trying to solve the problem any way I can and your help would be gratefully appreciated.

Kevplumb, Not very constructive mate can we be a bit more positive so I can fix my problem thanks in advance. :cry:

Iangh, Thanks will give this a go this evening after work and will let you know the out come tomorrow. But any other surggestion will be greatly received on the of chance this will not work?

Tried this no joy still cold :cry:

Thanks for the reply but I have had the guys back and on the second visit flushed the system again, still the same. He then proposed to ripe the floor up in the bedroomsand the landing as he thought it was a blockage. i must stress that the system was OK before we had the work done. I now have...

I have just had a new boiler fitted a potterton 50He I have also had all new radiators fitted.I have had the system flushed and all new trv v/v fitted to the radiators. However I have two radiators up stairs that refuse to get hot. All the down stairs rads are ok and the towel rad in the...

I have just had a new boiler fitted and also new rads which i fitted my self(rads only) the boiler is functioning great but two of the four rads up stairs will not get hot. they have at one point got warm but fail to get to full temp, Can some one give me some advise as to what the problem may...