Recent content by tommy99

Many thanks. I will give that a try.

hi, thanks for the replies. I may have got the blue/yellow the wrong way round. I have taken the light off so may have been mistaken. I have taken a picture of the switch to see whether that helps. I have exactly the same light (old one) at the back of the house and I have taken a...

Wiring of the switch to the new light

Wiring in a second light exactly same as old light

Make and model can be seen

Thanks for the feedback. Attached is a diagram of the old light and the new light. I have got it working when the light switch is on but when off, the light used to come on if the sensor detected anything but I haven't got this working with the new light. I think I just need to know where...

I am after some advice please. I have purchased a replacement outside security light. There is a switch inside which allows the light to be switch permanently on or when off, the light operates in PIR mode. When I removed the old light, there were 3 wires plus an earth. On the new light...

The fan on my cooker hood has virtually ground to a halt though it is still spinning slowly. I suspect the bearings may be clogged with grease (but don't know for sure). I have tried to open the fan casing so I can clean it but I can only get to 3 of the screws without taking the whole cooker...