Recent content by TomThumbasdf

This info from support may save others the pain I had , in the future The PIR indicator will pulse blue for approx 1 minute after learning on, then when it's fitted into the backplate will stay on for approx 10 minutes, following that the only time it will illuminate again is during a walk...

secureiam Nothing has changed. When the pir was in it's current position it had a constant blue pir light . I tampered the pir and the light went off , so I just left it and went to bed. Next day I thought I'd set the alarm and see if the pir triggered the panel. It did , so I'm just not...

secureiam thank you for your responses I have had more fun and games with this wireless device . At least now I have positioned the PIR in the garage and it triggers when the alarm is set if if I walk into the garage , so I'm just going to not touch it any further. The keypad indicates a...

I performed some further diagnostics I cleared zone 25 using the keypad . I then chose to learn the device on the keypad I inserted the battery. into the pir There was a short pink light, a short green light and it then blinked blue for about 60 seconds , before it went solid blue. It was...

Hi , many thanks for a response. The garage is relatively clean and only used for storage, but I get your point. I understand the 3 minute rule, but even after that time it's not showing a blue light when I walk past. I have not "put the system in commissioning mode to build up the ricochet...

Hi; I'm having a few issues with this brand new device. It has been learned on zone 25 . I can trigger the pir and the blue light comes on and then goes off after say 10 seconds. If I take the pir to the final destination i.e. garage and fix it , when I add back the cover I get a pink...