Tonygeek's latest activity
-
TTonygeek replied to the thread Bypass valve.By way of update ………. The faulty external ABV has now been replaced and the new one is working correctly, stopping the unwanted flow...
-
TTonygeek replied to the thread Bypass valve.Thank you Johntheo5. Yes, I have also been thinking in terms of scaled waterways in the HEx, rather than really clogged up. Once one...
-
TTonygeek replied to the thread Bypass valve.Hi Johntheo5, have done the measurements and here are my results: First set are at pump map 2 (200mb): Target flow temperature set: 70...
-
TTonygeek replied to the thread Bypass valve.Thank you Johntheo5. Will do when a get a bit of time. Trying to keep all my life balls in the air! Have been in communication with...
-
TTonygeek replied to the thread Bypass valve.Thank you dilalio. We actually went for by far the most expensive quote with a personally recommended company that is Worcester Bosch...
-
TTonygeek replied to the thread Bypass valve.Thank you again Johntheo5. Yes, that was my conclusion (before getting back to WB about the flow temperature issue and a possible HEx...
-
TTonygeek replied to the thread Bypass valve.OK Johntheo5 …… ABV set to 0.6 (600mb+). Boiler started by raising room stat for one heating circuit. Pump at 150mb; wait 5mins; Pump...
-
TTonygeek replied to the thread Bypass valve.Thank you Johntheo5. I will do that and post back. Meanwhile, glad to hear you have the same suspicions as me!
-
TTonygeek replied to the thread Bypass valve.Thank you Johntheo5. Yes, I followed all that on the Buildhub thread but am not so worried about the indicated flow temperature...
-
TTonygeek replied to the thread Bypass valve.Thank you Johntheo5 and Mister Banks for your replies. Firstly to Mister Banks, thank you for pointing me to the thread on Buildhub...
-
TTonygeek replied to the thread Bypass valve.Hi all. I’ve just joined this forum because I have EXACTLY the same problem with the same WB boiler as GeddeMortgage has been...