Recent content by Toonfan#1

Cheers mate will let you know how I get on

Ok took the readings as suggested, AC 230 and DC 0.0 at both the terminal positions for the battery and the feed to the alarm panel. I take this means I need to get it dismantled and re-soldered?

Is it possible to have this repaired?

Opposite side

I have also noticed some slight burning marks around the resistor on the other side

Yes I have a multimeter, and the unit has a small amount of staining / burning on the back.

Thanks for the posts, I have attached some photos of the transformer, board, I have checked all fuses and they are ok and as for voltage for secondary I don’t know but the guys from Lynteck did send me the engineers manual, this has some details on voltage etc.

Hi after some advice regarding a Nexus 8 alarm system, the transformer inside the main panel has failed and the alarm will now only work from the battery, obviously not ideal. I have contacted Lynteck about a replacement transformer and they tell me that the product is discontinued and I should...