Recent content by tringk

plan b will attempt to install new duct exiting through soffit. no way to reach soffit comfortably safely so will try reverse install will this work? 1- 102mm hole from loft side into soffit 2-attach ducting onto vent securely 3- from upstairs window feed otherside of ducting into soffit hole...

Further down i have another fan which terminates under eaves is it possible to connect two fans to one exit run?

Had a new bathroom a few months ago and had poor performance from shower extractor. Took a look in loft and it is a bad install ductwork is badly done into vertical extraction and no codensate trap. Moved the ductwork can hear water in there. What do i need to do/buy to rectify?

Balanced system increased pump to max. Slightly better but not as it should be. pump is upm3 intergrated 7m max head. That run of pipework that feeds those rads is 22mm into loft from garage then back down quite a long run . Wondering if anyone knows if those intergrated pumps are replaceable...

Drained, mains flushed pipework both sides one through radiator. Still same.

Boiler is 35kw 13 rads 3 are towel rads. Pipework is old and comes and goes into floor so i cant see 2 pipes and dont know whats under the floor. I have previously removed the radiator and drained the system from both valves flow seemed ok.

2 Rads with 1 feed back to back lounge/other side hallway do not work well. Hallway takes 30 mins to start getting a good temp and lounge is still cold. Both flow pipes hot and just inside radiators after valve hot. balanced, bled, put cleaner increased pump speed still no improvement. Only way...

thank you sir. can i get electrocuted if i dismantle the switch? its last hurrah was to turn the thing off. what do these switches actually do?

hello, i know nothing of electrics. the cord has snapped clean out of the switch. link to picture(whichever one works) http://allyoucanupload.webshots.com/v/2005434878699186767 any help would be rewarded with a billion pounds(thats a joke so cant sue me)[/img]