Recent content by ukml

Removed it this morning, all cleaned out and refitted slightly angled to the flow (thanks oilhead) hopefully that will have done the trick. If not, I will fit an alternative switch.

To the best of my knowledge the whole switch was changed twice and on one occasion the top plastic part only.

You may well be right but I can't find any reference on the interweb relating to this specific fault and needless to say Worcester Bosch are not admitting anything. I should have pursued this while it was still under warranty but got fed up with taking time off work to wait for an engineer to...

Thanks for the info, I will check it at the weekend and angle it if required.

Hi Oilman, thanks for the reply. The pipework is definitely all clean, with regard to the fitting angle of the spade, I think it is square on to the flow. Is this correct? The switch was actually replaced twice under the warranty by Worcester when the boiler was new but it never solved the...

Hi, can anyone help me. We have a five year old heatslave boiler and the flow switch intermittently sticks on even when the timer is off. Consequently the pump runs continuously until I tap the switch or wiggle the wire going into it. Tried a new switch but its still doing it. I can't make it...