Recent content by vigalent

Can anyone make any recommendations on where to source (and have fitted) a granite worktop for our kitchen project... I know there's plently of companies on the internet, but its always hard trying to sort the decent from the poor without recommendations. Worktop is U-shaped and total...

Ok, so from whats been said so far...... Chances are its going to come with a 13a plug (which if it does, I will not remove just in case it invalidates the warranty) It will need to go on its own circuit (min 16a) and wired via either an accessible FCU or 20DP sw which will feed a...

I'm not really bothered if it has a plug or expects a FCU, just what I need in terms of the load size as this will dictate how its wired. The oven we are looking at (Zanussi ZYB460X) says it can be connected via 13a plug. Either way, I guess I need to have a seperate circuit for each, so...

Ok, so now I'm slightly confused.... Just found the manual for the microwave we like and it says... But then goes on to say Seemingly indicating it can be fitted with a plug or via a FCU... If it is a plug, surely wont it be rated 13a and thus under the max load?

Probably, but I'm an engineer by trade, planning is what we do! Thanks all for your assistance, much appreciated.

This might not be possible. The hob and oven will be on oposite sides of the room.

Point taken, I guess 3.4kW works out about 14amps (doh). The manual for the microwave we're looking at says... Have I assumed wrong they meant a 13a plug? How about the rest....does it look feasible

Hi All....Long time lurker, 1st time poster. Looking for some advice / guidance regarding proposed wiring for our kitchen which is to be completely renovated. Now before the obvious, I don't intend to do the wiring myself (I will get a qualified sparks), and I know its notifiable etc...