Wayners's latest activity
-
Wayners replied to the thread 782mm internal fire door.You could add 10mm or 12mm of MDF up the side of legs. Fit new architecture and door stops. Door would be fine with a trim off edges -
Wayners replied to the thread Fire doors.Are you under regs? Doors inspected? At work we don't really repair doors just replace them because of inspections. You could just use...
-
Wayners replied to the thread 782mm internal fire door.Have you looked on Howdens website? They sell doors that will fit but you will need to cut down. I don't know how much you can cut off
-
Wayners replied to the thread Removing Old Backer Board And Adding New - What About The Holes?.I've seen walls with many holes when paneling was removed but never a problem drilling more. If you hit another hole just use a bigger...
-
Wayners replied to the thread Paint adherence.Give paint a good mix. Clean surfaces well. Meths is good as will remove grease and grime. Then a wash over with damp microfiber cloth...
-
Wayners replied to the thread Removing Old Backer Board And Adding New - What About The Holes?.If you think it's a problem. Blow out holes with a can of air. Use watered down PVA about 4/1. Wood glue will do watered down as it's...
-
Wayners replied to the thread Giant Notch In Joist.5 mins in here shows you how to sister the joists.
-
Wayners replied to the thread Chest freezer.It's called a freezer drain hose adapter. I can find them in Europe and America for some makes but not in UK.
-
Wayners replied to the thread Chest freezer.I didn't think there was one? As soon as you undo, water will poor out or do you attach pipe before you defrost? I just use a cheap wet...
-
Wayners replied to the thread How do I get rid of this adhesive residue?.Multisolve. Toolstation. B&Q and many other places sell. Works quickly although stubborn glues give it a minute
-
Wayners replied to the thread Paint adherence.Looks to me that after you applied paint its started to dry and as you have gone back over so it's skinned up like jelly. Not sure what...
-
Wayners replied to the thread Quality of base coat?.Re Leyland Super Leytex. New plaster. Yeah. New build houses take 6 months to dry out so builders use paints for new plaster that allow...
-
Wayners replied to the thread Quality of base coat?.Read the online data sheet for Johnstones perfect matt on how to apply to plaster. You can follow manufactures advice. Another way is...
-
Wayners replied to the thread Screwing straight through full depth of timber.Drill a small pilot hole and use screws you have then.. One question. Why not buy the right screws or treat yourself to a small mixed pack.
-
Wayners replied to the thread Tile backer board on brick wall.Ob1 is not hard. Tile adhesive is. Use tile adhesive and get it plumb. When set drill through and screw.