Wayners's latest activity

  • Wayners
    Same thing at work. We had leaks for years so they got a firm in with a static brush and it sparks where the holes are. There were loads...
  • Wayners
    Wayners replied to the thread Scam ??.
    Something odd there as scanner won't work unless the correct weight in on scales/bagging area. I think the shop worker had overrided the...
  • Wayners
    Wayners replied to the thread Moving fibre router.
    First test your speed off your internet. If that's ok buy a mesh WiFi kit. You could move it but you may have many devices connected...
  • Wayners
    Either. If building out with bonding use the one pictured. For a thinner coat of bonding use thin coat beads after with the multi
  • Wayners
    Will take 7 days to fully cure and harden.
  • Wayners
    I think the surface of moisture resistant board can cause the plaster not to stick so well. That's my understanding. I used to seal with...
  • Wayners
    I remember back in the 80s a old painter locking himself in a pilot and using emulsion as a undercoat. Cutting corners and saving money...
  • Wayners
    Wayners replied to the thread Leaking TRV valve pin.
    I've never done one of those as Im not a plumber. I've swapped plenty of valves though. Sealed system with a combi boiler? I just turn...
  • Wayners
    Purdy sell medium and stiff brushes. Brush choice is very personal as we are all different.
  • Wayners
    Sticking board on with foam might work. I've thought about it although not tried. I will say expect it not to work as well as you would...
  • Wayners
    Wayners replied to the thread Trumps peace deal.
    It's a Ukrainian surrender document. Maybe they can negotiate something better. I don't think so. If zelensky signed it then he would...
  • Wayners
    Wayners replied to the thread Ceiling crack mistake.
    Just dig and pull tape off. I'd expect that to come off easily. Scrape off plaster and start again. What you concerned about? It's...
  • Wayners
    You could fill it with 5- 6% acidity cleaning vinegar off Amazon and leave for 4 days. That will clear rust
  • Wayners
    Wayners replied to the thread Pre-Painted Wickes Door.
    I used to seal them as the factory primer is very dry. There are different ways to do it and different products. I always screwed legs...
  • Wayners
    Wayners replied to the thread Adding a socket.
    Live. Neutral and earth. That's 3 wires. Please take this as my concern... I'm worried about you messaging with that if you are unaware...
Back
Top