Wayners's latest activity
-
Wayners replied to the thread How to prepare narrow window reveal for plastering.I've stuck elements board on with foam. Plaster over. Should use limelite plaster That what I would do but I'm no expert at this -
Wayners replied to the thread Waterproofing coat before painting?.You don't want to seal walls with anything. The paint needs to let moisture through. I have limited knowledge but plenty of information...
-
Wayners replied to the thread Waterproofing coat before painting?.Solid walls. No cavity?
-
Wayners replied to the thread Buying wood (as someone who doesn't drive)..Local saw mill or like me do you have a hardware store with a saw mill on the back! Several in my area plus timber supply merchants...
-
Wayners replied to the thread Dealing with PVA on plaster/walls.Bodge a cheap orbital sander on a vacuum and you can sand it off. Use 120 grade.. I've always just applied emulsion over PVA and never...
-
Wayners replied to the thread Flaking paint.You fill and sand smooth first. Then stain block. Products like Zinsser BIN will seal the filler and stain block... if you use peel stop...
-
Wayners replied to the thread Sick of Mould behind radiator.20lt dehumidifier. Run for 4 hours every evening during winter and maybe a bit in summer. If you remove the moisture in the air it...
-
I bought one in 2010 (it wasn't cheap!) but found the colour chart vague. Don't know if later kits are any better but these days I do an...
-
Wayners replied to the thread New boiler or not?.Yeah. You can bleed a radiator to get some in . Take a while to to get water through radiators but it can be done
-
Wayners replied to the thread New boiler or not?.Yeah. You can buy a inhibitor test kit to test the concentration. From what I have been told you can't have too much inhibitor. Add...
-
Wayners replied to the thread Which UV oil on cladding.Phone the manufacturers technical department. I'm a trade and that's what I do. Make sure you use the correct product and the...
-
Wayners replied to the thread Shed rennovation.I think I would dismantle shed. Build a higher base from slabs or concrete., If your base is flat you can just put the shed on that...
-
Wayners replied to the thread Shims under garage flat roof joists.That's terrible. Not my area tbh but those are window packers. I have packed roof trusts with slate. Normally you have a wall plate...
-
Wayners replied to the thread Issues with window sill and upstand tiles.Gyproc coving adhesive id use to fill. As first mix is setting in about an hour mix some more go over. Sticks to most things. Might take...
