Recent content by whufc

Thanks for your prompt reply... he said he is Part P registered and he will give me a certificate after the job is completed, but I need to make sure that he is registered before I get him to do the job. Will he have a part p registartion number that I can check with someone? As for the...

I have an external socket fitted outside by the builders, its a fused 13amp spur with the switch inside the kitchen. I have asked an electrician to give me quote to fit two further sockets around the garden.He said that he will take the feed from the existing socket to connect the 2 new sockets...

Thnaks for your advice I wanted to know what I can do without getting a qualified Sparky, can you claify one matter, if I use 12v devices driven by a Tranformer will I be able to do this without getting a qualified electrician and also would i need to get a part p cert???

I have a power socket fitted outside ( by builder) I want to build a shed on the side of the house, the question I want to ask is if I wanted power in the shed and also a cable running into the garden to power some lights, if I used arnoured cabling and tapped of the back of the outside socket...

Thanks guys for your advice, Thank you Zampa for the web link, so who are Millwall FC?

the on the ceiling above the shower has jsutstarted peeling, the house is only 18months old,, what should I do before painting it again?

removed spur.. just in case..thanks

replaced MCB and fault gone.. thanks

My MCB (45Amps)) keeps tripping after 5-10 mins after the shower is turned on, it has been working ok for about 3 months then suddenly started to trip the MCB, then finally the MCB overheated and started smoking.. the shower is fitted with 10mm cable and goes from the consumer unit through RCD...