Recent content by widgett22

ive a dual economy 7 hot water cylinder and both immersions were changed last week after they both broke together. i thought it might be a power surge as i live in a block of 10 flats and maybe a neighbour is messing around with the electrics.now theyve blown again and a circuit pen tells me...

heater charges up and closes the holes at the top of the heater saving heat during the charge period and theyre supposed to open after to release the heat. they dont open up and its got 3 controls ,comfort /manual and frost the instructions show the 3 positions on the controls are 1,2,3...

heater charges up and closes the holes at the top of the heater saving heat during the charge period and theyre supposed to open after to release the heat. they dont open up and its got 3 controls ,comfort /manual and frost the instructions show the 3 positions on the controls are 1,2,3...

the instruction book doesnt show the same dials ive got+its got my model number as well as a few others printed on the front page,it says the holes will close then open up after a charge

heater charges up and closes the holes at the top of the heater saving heat during the charge period and theyre supposed to open after to release the heat. they dont open up and its got 3 controls ,comfort /manual and frost the instructions show the 3 positions on the controls are 1,2,3...

what does the dp mean in 20 amp dp. ,i just want to fit a single switch to the bottom immmersion. the top tank of this dual tank cylinder has a timer switch already, this is the one i use daily .The bottom tank and single switch will just be used weekly

what ampage do i use to change a switch on a 3kw dual immersion cylinder tank(economy 7).The switch is just a rocker switch going to the bottom immersion .I have a timer on the top immersion(mostly i use)