Recent content by woodywoodpecker

Just out of interest, where can i pick up some new electrodes on a saturday near grantham lincs :? cheers all

I think your right, cheers James

Hi guys more bad news, boiler kept saying L0 it would start but always back to L0, anyway i had a play around with the electrodes (where the spart happens) and ni broke one, they wwre very brittle, also while the door was open i had a look in the chamber and you know at the bottom, there is a...

Sorted, it was the flow switch, the inside of the old one sheared off! Now i sometimes get L0 which is ignition, i've had a fiddle and its working, but i might need to fit a new ignition panel- I wouldn't have a baxi again :roll: It was here when i moved in, infact i would go back to...

sorry L8 is primary flow CH i get both mostly L7, could it be the primary flow switch? as for testing i'm just a jack of all trades no plumber, but i know my way around a little.

Hi Chris the boiler is a Baxi 130 he (same as the heading) I changed the pressure release valve a few months ago due to loseing pressure and it worked a teat, at the same time a few drips were coming from the primary flow switch so it needs changing anyway(i've just taken it off). I will fit...

L8 is primary flow dhw, i think its the primary flow switch, if this was faulty the boiler would't fire up is that right?

Hi guys yeh the pressure is fine, its now saying L8 and just whirring, i have changed the pressure release valve. Could it need more pressure in the chamber is it 12 psi ? Also is it the flow switch thats bolted to the boiler then the pipe off that cheers

Hi all, my baxi combi is playing up, its saying L7 and something id just spinning around (pump?) If i switch it off and on again then turn the water on it just goes straight to L7. Help no hot water or heating :cry: L7 is Primary flow (dhw circuit) When it started normaly it would...