Recent content by wtknsstp

any preference in cabling i should be using to wire it up and for the low voltage part?

see what you mean. Hence why i need to put in the 3a fuse before the light. is there not a way to get a triple pole isolator with 2 3a fuses in it, one for each live?

so does the link below seem correct as that seems sensible, also rather than just an isolator though i could use a combined isolator with the 3a fused control unit, rather than seperate http://www.ultimatehandyman.co.uk/diy/electrics/extractor_fan/shower_extractor_fan_fitting.htm

ok cheers for the help so would the ciruit go to batten holder then switch or other way round?

yes, had electrician check everything when the fitted a new ring in the kitchen. only thing left to sort was the fan. is there a way to take the supply from the batten holder and then run it back out to fit the fcu and still use the light switch so they come on together but the fan also has a...

cheers so fit the 3a fuse before the light circuit in the bathroom, then just run seperate from there to the fan (via an isolator) and light?

REcently bought a property and have been advised by an electrician that the fan in the bathroom is a normal high voltage fan and therefore not suitable for above a bath. I have therefore purchased an extra low voltage fan with transformer and timer. I understand i need to install FCU...