yartin's latest activity
-
YThe pumps age is on the front.....PC9913. as you said, week 13 1999.
-
Yyartin replied to the thread CH Pump Problem.I don't have Magnaclean but planning to fit one one soon. I do regular flushes every year but magnaclean will defo improve system.
-
Yyartin replied to the thread CH Pump Problem.I was not trying to repair the pump, I was asked to dismantle and see what's wrong. Again in pls read previous post #62 above. So I...
-
Yyartin replied to the thread CH Pump Problem.I dug further, removed the fan and got the bottom of the issue, broken plastic bits from fan which cause the grinding noises on its last...
-
-
Yyartin replied to the thread CH Pump Problem.I think I'll repair and save the environment. Have you read the previous pages; was replaced 2 days ago.
-
Yyartin replied to the thread CH Pump Problem.There is no other UK seller for this part. From ali express; is not going to be the original so inferior and won't last long so may be...
-
Yyartin replied to the thread CH Pump Problem.Oh yes, moved to the house in 2002 and was there so 23 years plus and now had to be replaced. The new model UPS3 is much lighter.
-
Yyartin replied to the thread CH Pump Problem.Impeller kit to replace ...
-
Yyartin replied to the thread CH Pump Problem.I looked on you tube and there was a vid.
-
Yyartin replied to the thread CH Pump Problem.I managed to remove the impeller, there is no blockage in the veins BUT the fan is not turning freely meaning the grinding noise I heard...
-
-
Yyartin replied to the thread CH Pump Problem.I emptied the header tank last week, is it a good idea to add 0.5L of the Sentinel x100 to the system? Guess taking off 0.5L or so...
-
Yyartin replied to the thread CH Pump Problem..
-
Yyartin replied to the thread CH Pump Problem.I had 8 rads when moved in 2002 and all was fine but after ground floor extension became 12 rads had issues heating the rads in the...
-
Yyartin replied to the thread CH Pump Problem.Would an automatic bypass valve do a better job? it's suggested by @Johntheo5 in post #61 above.
