Recent content by Yiddo13

No they go to the actual nest thermostat

I have wired it up like this I hear the heat link click when I turn the thermostat up and down but the boiler doesn’t fire up.

I dunno. Thermostat has 2 cables (t1 and t2) which I just put into the t1&2 terminals on the heat link and it has power

Thanks for the reply. What about the other set of black and red from the boiler?

I know there’s a billion threads on nest wiring but I can’t seem to find where I’m going wrong no matter how much I read. I have Britony combi se boiler the nest was already installed but has never worked properly. I’ve taken everything apart and I have 3 sets of wires. Black and red from the...

thanks for that, says 90mm for me for 0.20u with 42.5 insulated plasterboard. in theory the building control would sign that off?

that would make the gap for ventilation 70mm instead of 50mm? is that ok? Also i was under the impression i only needed to out insulation inbetween the beams and then insulated plasterboard underneath them would be ok? buying 100mm and 50mm insulation is going to cost a bomb!

So it’s goes Membrane 50mm gap 100mm insulation That would leave a gap of 20mm between the insulation and plasterboard is that ok?

my local building control are useless at being available to talk to. How do I insulate for a pitched roof (staying pitched inside when complete) for a cold deck (?) roof. Do I just need to insulate with celotex that fits to the bottom of the rafters with a 50mm gap at the top between the...

But the cloak verge look a billion times nicer. Guess that’s all I can do now though. ☹️ Thanks

4 inches either side.

How do you mark them out correctly? All I can work out is that 12 tiles is not enough but 13 hang over far too much.

Clock verge, is The tiles that hang over the fascia? If so then yes.

Are these tiles compatible? Iv used Marley’s but need a half tile to make it all fit. Can only find redland grovebury half tiles online. Will they work? Thanks

Iv done my roof with Marley mendip smooth browns but need a half tile to make it all fit. I can’t find the mendip half tiles anywhere but have found Redland grovebury half’s. will they work? Thanks