Search results

Type in the code and it will show the fault on the screen eg F 5 alternating ?

Sound like panel is bust then does it do same if u link the zones out directly on the panel

All zones are open circuit. I would first rule out any issues with the panel by fitting wire links across 1 or more zones and trying the walk test, of this is ok u will need to determine your zone wiring is correct and make sure devices have 12volts, check if aux fuse has blown. This wouldnt...

Happy days

Any joy?

Change the 'set fail' timer to 100 in change timers. Also change 'use level set' to yes in site options

Whats it show in the logs ? Sounds like set fail timer has expired before your exit timer

1 App exit volume is programmed seperately under volume control. 2 Program hall sensor as ER (area FX). 3 can do siren test in engineer tests or manager menu

Does the tone change when u open the door

May be old but still works lol

I didnt get one of the inside.

Any one got a manual ?

Just leave the lod off and it wont go off again

Either wire

Yes it will work. Keypad will flash orange but no sound

Disconnect 1 of the wires then the tamper fault will remain so it wont keep going off until your engineer comes back

If u have learned the contacts to inout 17+18 make sure zem 1 is enabled under INSTALL ZEMS

Users codes / fobs need to be programmed via manager menu on keypad, so no camnot do via app. Each user when programmed via the keypad will be assigned to areas, i.e A - full set, B night set, depending on what areas you have programmed you can assign areas to users accordingly.

The only difference with the pet one is the lense filter. If u got cats then wouldnt bother

I dont really see any reason to stay connected once the alarm is set anyway lol