Search results

Hi Guys So its a new build house (frowns lol) - moved in last year, just realised when I switch the boiler to hot-water mode only using mode on the boiler. You can see the valve moving upstairs but the boiler will not fire up. In both heating and hot-water mode, all works fine. The guys from...

Thanks for the suggestions and tips guys, will give this a go!

Hi So we have a new build under 2 years old now, unfortunately my father in law reversed into the corner and of course a small chunk of both sides and the render corner, have been damaged. Is this an easy fix with some render mix like this ->...

The Hall PIR is set as 08. Entry Route, so far been over 3 weeks and no issues... lets see how it goes! Thanks to all for help and support thus far.

the settle time has been left as default which is 5 seconds, I have actually set that to 10 secs now, should be enough right?

I checked this last night, looked ok, from the time the arming starts, i.e. Final Exit to the Hall PIR going off was 2 seconds. And also I this had happened when I also entered the property the previous day on entry with a delay of 30 secs (hall PIR set to 06. Entry Route of course) I will...

I could not see anything obvious in the log other that Hall PIR sensor has activated an alarm. Will keep an eye on it now and as Sparky suggests look at settle time and of course a potentially defective PIR.

Thanks Sparky I did think initially this seems like a the hall sensor playing up, what do you normally set the Settle time as? Thanks A

Oh wow, snap, ok so firstly Happy New year to all! Thus far its been ok, I have left the settle time to default but may increase this and see what happens...

hi guys after 5 months of no issues with my Pyronix enforcer, randomly the other day both on enter and then today on exit the PIR in the hall (set as Entry Route as I only have one area set as A) went off when I set alarm via the panel and open/closed the door (Final Door) Set up as follows...

Hi Just wanted to know what this 'Set Fail Warning' setting is referring to (as opposed to Set Fail Timer which is set at 40 secs default. In the manual it states "Time for which a set fail warning will be present." Yet it seems to be set at 0 secs as default, what does this option do...

Been away for a while, yes I did. Basically the manual is wrong, the format you need is as follows: smskeyword 1**** 11 00 to arm. (00 to disarm + 00 to receive a confirm SMS) eg. mike123 11234 11 00. you have to use area code as 1, even though the manual states you dont, and you have to keep...

Ok - don't see how that has anything relevant to this issue or thread to be honest? Back to the topic.... So had anyone got the SMS remote command working on this panel?

Are you by any chance getting this confused with the Yale Smartphone alarm? The one being discussed here is Yale Smarthome, Grade 2 designed for professional install only, however MAP sell it so competent people can only self install it.

Hi Sata1234 I have tried that also and it did not work, I am currently waiting on a product expert over at Yale to get back to me, its taking a long time to be honest and im getting a bit disappointed by this so called flagship Yale grade 2 alarm. - appreciate its for professional install only...

@Europlex - it was already turned on. I did a power down cycle on the panel and that did the trick, so that is working now. @Sata123 - thats a good suggestion, however this does not make any difference at all and the fact remains that I can dial to to the panel and arm/disarm irrespective of...

I am still waiting for an update from Yale, their customer service team is chasing the product manager. Has anyone set-up SMS remote commands on this panel? This is the format "k-word_PIN_11_00, for example the SMS im sending is "akz_1234_11_00" (kword setup as "akz" and 1234 is a PIN, 11 is...

I dial in via my personal mobile and the control panel answers then let's me choose options to arm/disarm etc Also if an alarm is triggered the the control panel sends me a notification via sms so that's also working. I just can't send an SMS with a keyword and my pincode to arm or disarm via...

I'm trying the same exact procedure as you are. I even setup the sms confirm function for +44 format. But nothing happens. Which provider are you using? I've got a Vodafone sim which I just activated but a few guys have mentioned try O2/giffgaff, I can't see how that would make a difference...

I'm going to try a different sim could be the commands - I'm using an iPhone 6 but can't see how that would send an sms any different to a conventional phone (do we even use these nowadays lol) -I've checked the menu whereby remote command is enabled as I can dial in and it works ok. Failing...