Search results

The PM programme on Radio 4 has been talking about this and, as long as you've got a condensing boiler, they were recommending a Flow (i.e. as the water leaves the boiler) temperature of about 60C. they seemed to be saying that that's a setting of about 3 on a Worcester Bosch boiler on the CH...

Usually a cable has some info stamped on (usually only) 1 side (its a sod to read especially in a dingy loft), an example I have is: CMK BASEC ELECTRIC CABLE BS 6004 6242Y H 2 x 1 +1mm² 300/500 V CE 2019 hopefully others will say if I'm guessing wrongly, but I imagine it starts with manufacturer...

Deleted as no longer relevant.

They were certainly making them in the early 70s, I'd reckon no later than 73.

Deleted as no longer relevant.

13Amp socket is fine. It looks as though it's got a metal faceplate so as long as that's earthed OK (along with the earth receptacle) then you're OK.

My memory is that I used to hover over my moniker to get a drop-down which included Logout, now I have to click on the moniker. I'm using a Windows PC. When replying, clicking on the Preview button doesn't seem to do anything and the "Watch Thread" options aren't clear (do they still exist?).

Apparently it was fetus . I'm pretty certain R4s 6 o'clock news yesterday claimed that was the UK spelling, D'oh.

Looking at the only twin brown I've got (bought from TLC) both browns are the same (to this DIYers eyes) and are white cored with the brown on the outside only. Edit: Supplier corrected.

I'm not clear what you're trying to tell us, as that's a repeat of part of the initial post. Have you tried Sunray's suggestion?

Deleted as no longer relevant

Yes, an Intermediate switch is a special type. Looking at Sunray's diagram, to the right of "LANDING" the switch has 4 terminals which either connect black to blue and upper red to lower red OR black to lower red and upper red to blue. An Intermediate switch can be used as a 2-way or even a 1-way.

Previously: I reckon Bernard's recommending Switched, as with Unswitched you'd only be able to remove the fuse which leaves the Neutral connected.

In your picture it's switched off so there's a good chance it's not connected to anything (to anything that's in use?). With the power switched off you could try opening it up and seeing if there's any input and output cables and the direction they come from, but it's scarcely worth it if...

Deleted as no longer relevant.

There used to be (still is?) a computer company by the name of Wang, they had some lapel buttons made up saying "Wang Cares".

I'd have expected the the 4 normal switches to be daisy chained together, so that 3 (not the last in the chain) would have 2 wires in the COM terminal and 2 wires in the MAKE terminal, is the picture "other switch.jpg" of the switch which is furthest from the Timer switch? Obviously I'd be very...

Living down to my moniker and proving I can be a right pedant: I agree the earth wires could be slightly better positioned but as the blue wire goes round the plastic "hook" in the rose, I believe it's more likely to push on them.

Sometimes people on here recommend this sort of thing: https://uk.farnell.com/ampohm-wound-products/fe-sp-cr28-470-100/cap-sup-x2-0-47uf-250vac-radial/dp/1438452?MER=sy-me-pd-mi-alte to prevent the glow, but I've no personal experience of these.