Search results

Hi, agreed. I have gone into each room and removed the sensors, some had sounders piggybacking the sensors. There were a couple of break glass units aswell. As a secondary test I applied 24V DC across the circuit with a multimeter in line and measured no current. I will do a final check before...

Hi, yeah this is what I would like to do. Thanks

The daisy chain was connected to the loop of the Kentec fire control panel, the radial powering the control panel.

The original alarms were connected in a daisy chain using the twin core and earth. So connecting the radial from the CU to this daisy chain will be ok?

The existing cable is twin and earth, there was no interconnect used on the original circuit, each alarm was addressed.

So I had a look at the cable and it says BS7629-1 300/500V. The base blocks of the alarms have L E N and an I interconnect, but the alarms I am looking at can interconnect wirelessly so the fourt connection not needed. Having investigated further there is a radial connection from the consumer...

Hi. I will supply some photos. The sensors are analogue addressable Hochiki sensors and have a +ve and -ve and an earth and rated at 17V-40V DC. They are daisychained throughout the house. I will check for ratings on the cabling.

I have recently moved into a property that was used as a small care facility. It has a fire alarm system and hochiki low voltage sensors in every room. For me this is overkill and the control panel is in the hallway and ugly, so I want to get rid of it. My question is can I reuse the the...