Search results

or triple back boxes , i have used for a doublke socket and FCU if required But that would mean , taking out the old backbox and remaking the hole in wall maybe just take off the cover plate and put a single backbox next to it and wire the fused FCU as a spur - depends on what you have already...

here are some pictures of the bleed valve at the back of a slim radiator - on the forum https://www.diynot.com/diy/threads/replacement-radiator-bleed-valve-grub-screw-air-bleeding.301761/ and a video probably all painted over - Mine was and difficult to undo If you dont find the bleed valve...

i assume he took the £168 ??? - how did they pay ??? checkatrade are only interested if booked through checkatrade and the work completed , then i thonk its a max of £1000 - i have stopped using checkatrade having had issues in the past with trades not a lot worth doing for that amount...

what do you mean by if thats what i think you mean - then you drained the system down - not the radiator at all - if off see image with annotation so that maybe an issue - if it pressurised or if just gravity feed - then the header tank in loft may have topped up

isnt it good practice to wire the screw bulb holder so that live is at the bottom center ?

make sure, when you do, you get someone highly recommended to you a lot of EICR scams around - where they condem the installation for wrong reasons as NOT up to current regs , and then want a lot of money to put right - things that are OK- so many of these scams on this site and many other...

i would say the right connector with 2 wires are neutral and the one on the left is a switched live here is an example of how the wiring is https://flameport.com/electric/lighting_circuits/lighting_ceiling_rose_looped.cs4 did it have a ceiling rose before - the cable in the ceiling th e3...

you probably have a juncion box in the ceiling anyway - to take the LIVE down to the switch and then back from switch - possibly to the Junction box - Unless its modern ish and the neutral is also at the switch picture of switch does this help...

how about remote plugs

dont know what scotland is like and if any access issues seems high to me , but when i had this done on a bunglow was just before covid and prices have gone up since then £8,000 is a lot of deposit BUT how likely are you going to get the money back anyway - how did he pay , Credit Card, Debit...

if they dont have a connector to daisy chain , then you just take the drivers power to a junction box and from there to a switch is this modifying an existing light - or a new circuit - you may need sigoff when i setup my son-in-laws garage lighting - using daylight tubes - we wired up 6...

you can use an intermediate as a 2way as far as i can research - Never done that - i think as i dont know how its all wired up and its NOT setup as a 2way switch - just purchase an intermediate switch and use as a direct replacement maybe the 3rd switch has been removed and connected up and then...

is it only 2 switches that control that light - or do you have 3 you have an intermediate switch in the picture a 2 way does not replace that how do you know - anything else changed to the other switches do you have a mulitmeter and know how to use it - you could then test the switch

i gang 2 way - has 3 connections points available pictures of old switch and new switch may help - with wiring does it also have another switch to turn lights on off - so 2 switches did you take photos before you disconnected

i get a lot of shadows in my garage workshop - where i have 2 LED Tubes - Daylight colour - and so I also use a couple of lights on a stand to get close to the work - when th elights where on offer at toolstation

peter millard did a video years ago white is 4000K and not daylight - looking around 6000k for daylight which i prefer i have fitted a few LED tubes in garage for lighting when using as workshop & utility room - from screwfix and TLC tubes i cant see the tech spec to see if the driver is in...

we had it done by a fitter special mixer for the screed - i think it may have been 1200 https://f-ball.com/en/product/stopgap-1200-high-performance-smoothing-compound/ does not need primer and quite settings , so they coul do it in 1 day and then came the next day and laid the vinyl BUT may...

we had F Ball screed put over our uneven tiles floow in a conservatory - not sure if this will apply to your situation https://f-ball.com/en/smoothing-compounds/ But that was to put a vinyl over

cool, make sure it is a vice versa model - i ordered an vice versa from axminster (workshop) and what i thought was the same vice versa - BUT it is not just double sided i was sent , disappointing, i also think from various threads here axminster is in trouble , so i would not at this stage...

i have loads of tapes (DIYer) - Stanleyx2 on offer at screwfix , milwakie purchased on a deal at a fair , axminster on offer - thought it was different and was alonger vice versa 8m - BIT NOT SO BUT THE ONE I ALWAYS go for is my Advent vise versa 5m...