Search results

If when you run hot tap hall sensor is flashing its faulty, constant red light its ok

Do yourself a big favour and get rid of the red handle gate valves, well known for coming apart inside, had this problem more times than I can count over the years something like changing a tap washer turns into a much biger job, Replace them with FULL BORE LEAVER VALVES simple to do for an...

At 10 years of age you need to think about replacement, or you will just be throwing money at it

If hall sensor is flashing its faulty did one last week.

Get them to double check the pump ! just because it makes a noise doesn't mean it is working correctly

Try glueing a 1p onto the micro-switch arm could be just thick enough to make up the gap

Sorry my mistake, getting it mixed up with Baxi ! But not seen a Jaguar boiler for years, not come across one in this area (13 years) these boilers must be over 15 years now

When these Jaguar boilers came out think it was G/Worms 1st attempt at a condensing unit,(Still got the toy Jaguar given free with the boiler) fitted a few of these around the Ascot area & had problems with PCBs & the rubbish Time control they fitted, Dirty systems in Berkshire was a nightmare...

Fitted a few of the easy-heat (Vokera) and the Clas (Ariston) never had any problems with any of them A bit more costly than the Easicom, if you want to look at the other end of the scale Then look at Intergas boilers.

Glow worm had a thing about fitting this second overheat reset hidden in the boiler, done it on a few models but didn't tell anyone about it,

Some what limited as to choice of LPG water heaters, Bosch do one for static vans but you need a good water supply Morco still make them F11ed is the new one (11lts per min) power flue so you maybe able to use same flue hole that your boiler used

Old pans were made for 9ltr flush new cisterns only 6ltr, that is why you need to replace has a full suite all down to the design if pan

This was not the best boiler on the market, only lasted a couple of years, parts still available Did your guy try the other reset button (Cant tell you where it is) involves removing boiler case but your gas guy should know.