Search results

mine still froze last year using 32mm.When i cut it it was solid all the way up. Fitted trace heating.See what happens in the next big freeze

you have nothing to worry about!! at that pitch your roofer will have at least 4" head lap unless your right on the sea front it will be fine. if it is all tiles should be clipped...

re=roof it with spanish cupa r12,and sell what get's salvaged. That horrid grey stack wants dropping as well

flashband!!! you can see the black tar on back side

On mine it was the flow & return temp was to high basically water not getting back to boiler quick enough!! power flushed it fitted tr1 filter and removed one of the thermastatic valve heads

Yes all the time!just had mine replaced plus i know of at least 2 others on site needing the same c/b.. working great now...

Yeah the boiler is working better and smoother than ever. So you think it's room stat related

had boiler serviced end of may.the engineer left a card saying further work needed doing. it reads like this external controls!!High temperature differentials 30+% what does this mean asked a plumber at work today but he didn't know. the card got shoved in the draw only just found it today...

Why code 5 code 4 is more than adequate for a valley. even with scaffold 1500 notes is well over the top i suggest you get several more quotes

id take it out and replace it with a fibreglass dry valley no motor to worry about ever again..

Why not just pay some one to lead burn it for you if it's only a small job cheaper in the long run...

Redland rapid flash is the best looking of all the none lead products.id never use lead now on low level stuff

This ones better http://www.screwfix.com/p/dewalt-xrp-dc988l1-18v-li-ion-cordless-combi-drill/74113?cm_sp=Homepage-_-Slide3-_-74113

http://www.screwfix.com/p/sterling-steel-d-ring-hiker-boots-brown-size-10/46305 Im A roofer!! with out doubt most comfortable work boot

Now looking to trade in for a good old Transit.Need to get rid of this ASAP

i have a similar problem on a primastar :evil: it's started missing for a fraction of a second!! you can drive 100 miles and it wont miss or it can miss 2 or 3 times in 5 miles.Snap on diagnostic said it was cam sensor. still the same.Spending no more money on it just going to drive it till it stops

Well it's F5 fault again seems to go 3-4 weeks before it does it again. glow worm engineer coming out tomorrow. if he can't cure it what chance have i got :evil:

no there hot :?

well its been fine for a month after a flush and fernox tf1 filter fitted.the f5 fault has reappeared any ideas on what to look for next.

looks like roofer has left his flask cup in the valley :wink: