Search results for query: Oil

so before i post such questions hear, i wanted to check if the site are not banning such discussions about oil fired boilers and other heating oil equipment (like they do with the gas)

...to run an 8mm copper tube as the fuel supply pipe line up in from the bottom of the stove into the inside of the top of the fire to act as a coil to preheat the oil so it dose not smokw, and then back down to the floor into a baking tray where it will drip oil into it and i will stick an...

Greetings! Not such luck on the internet, but I am looking for a waste oil heater with a back boiler The best I could find was this https://www.lanair.com/boilers but they are based in America and they did not respond to my email Anyone any experance or intrest in this idea please?

But so the story goes though.... Coil it with copper tubing will preheat the oil Pre heating the oil will raise the temprature of the oil and will combust and will attomise the oil better meaning less smoke and hence less soot! Over to someone ells...

what do you mean oil flame temperature? We are just pre heating it to thin it out a little. will depend upon temperature of the fire its self

I was hoping to buy a diesel heater to run it on waste oil after I got it up and running. Please see me OP

But the control valve will meter the flow and controlled by the opperator. As to variants in temperature and viscosity is irrelivent and dose not apply since the oil in the bottle will remain the same until the bottle is empety

says who?

but you make no claim to the bad stuff found in the oil or charcoal cooking

We are not regulating the oil/ fuel supply inside the fire we are regulating it before it enters the stove its self, all done at room temprature Where would i get a basic control valve from?

And what do you know about painting then? same as plumbing I guess

...Thinking of running it on heating oil first then move over to twin tanking and coiling it to run on waste engine oil Bit concerned about the power usage though Has anyone hear ever bough one of these machines before and can recommend or not? Thanks

...fuel pump. commonly used in rally cars No idea! but I think the pump will be up to the job on bough ends Hah good point! You put though gear oil and get noting to very little then you put though brake fluid and it comes out as fast as water But those waster oil burner do not have a flue...

...ebay made in China are simple electronics plug and play where you like. But those things need a fan which needs electric, plus derv/ heating oil costs where waste engine oil is free! Have you considered running your derv hearer on waste oils? I have not heared this. but lots of rubbish on...

Is it the Chinese junk modal in question or the German Webasto? How long have you ran it for? Running the fuel though a copper coil output of the heat output to pre heat the waste engine oil Dose it have 2 heat out puts then, one air and one water? do you think over all on run time its less...

Instead of burning solid fuels on the log burner. If we are the people we are the power we are the 99% where to run it on drip feed waste oil controlled by a gate/ needle valve tap. Then we could shut supply of in an instance. Would this now mean that we no longer need our gravity feed radiator...

Please read the whole thread and in particular to why the original posted control vale dose not need to be fire proof I must ask at this point? where an earth would you find an oil burner with hot fuel that you would regulate?

What dose that mean; are any of the 2 ends supposed to be soldered onto the pipe Why not?

So is Lye and sugar soap the best way to abstract hear? BTW The floor is very vert bad, flooring of a crappy old 45 foot trailer, oil, dust of 20 plus years and you name it. So it really is nothing to loose hear!

and why can it not be used in a house? did you not ask? or did you 3 bags full sir?