Search results

Have you considered asking your installer or contacting Worcester?

I don’t think it’s common, and it should turn with ease. Cover (plastic) looks on properly, you could try gently tapping or even applying a little pressure where it says mode and turn it

That just looks like an imperial olive. Definitely not flared end

That’s why I edited my original reply. As I re-read what you had put, doesn’t sound like one.

The existing fitting - could it be type b manipulative (flared)?

I nearly asked about this and was probably my next suggestion. Is the original setup the fan comes on with the light and you want them separate?

I nearly suggested that, but misinterpreted what was written :cautious:

Not sure it matters, but on one you have one to each L2 and the other L11 and L22?

You're not mistakenly putting the CPC/earth into a switched live are you?

Mine too! And apparently @fitzykev ‘s

Seems like a coincidence. Was the water off for any reason?

Engage with an installer there’s quite a few options.

Only in the electrics forum though. Otherwise it's you and BrightSpark, I mean Highwayman reporting each other ;) :D

Not surprised it's leaking then :ROFLMAO:

Ah, that does look more like a crack. Oxidisation/Verdigris is green and usually surface, but can be internal. Dezincification is where the zinc is removed/leached out.

I can’t see any cracks. Looks a little like oxidisation as opposed to dezincification. It’s plausible that’s where they could be leaking, but don’t think they need replacing.

Contact toiletspares.co.uk - very helpful. Looks like this valve : https://www.toiletspares.co.uk/flomas-side-entry-inlet-valve.html, but can’t see any washers available. A new valve would mean whole assembly, if it’s the one linked you could swap out if now washers available

That’s fine, likely on the sockets ring main or on a plug top. Maybe consider my other suggestion?

Would it be worth taking light fittings down, 1 at a time, eg ceiling rose and checking for moisture/ingress? Edit:I’ve just gone back over you’re photos and I don’t see any form of heating listed on your consumer unit (fuse box) - could it be linked to this wrongly?