Search results

I would say so yes

Yep, that’s what you need to do. If there’s an override on the existing receivers, you can try it that way before disconnecting anything

Yes this is correct. If you have opentherm capability on your boiler then it would be better using that, if not go ahead with what you want.

So if you’re correct 7, 9 and 10 are wires for heating and hot water, so you need to place the receiver here. I take it you’ve placed the Wiser in place of a previous programmer?

You don’t. The Wiser would take over the whole system and isn’t compatible with the Siemens. Where are the RCR receivers and where have you installed the Wiser?

It’s not the best, but not the worst I’ve seen either. It also doesn’t look square on the trap.

Looks and Sounds like the motorised valve for the heating but you’ve worked illegally on an unvented cylinder (TPRV).

Yes, a lubricant is preferred. As I say, check for burr.

I wonder if when reconnecting or originally the pipes had burr on and have cut into the seal?

Would it matter if they’re disconnected at the other end?

Dunno, but maybe from £stretcher?

Depending on which type is tripping, could depend on what it could be. If you’re saying it’s the lighting circuit then, imo, it’s likely an mcb. Could be a fault on the wiring, loose connection et al.

Have you tried a 3/4” one or is that’s what’s attached to the hose in the background?

If I remember tomorrow I can check an Ecotec pro (similar boiler other than a combi).

Is there a question here John or are you asking someone to check their boiler?

Perhaps you could try using grips and snap the bolt by rocking back and forth

My wife likes Yorkshire Tea, but because of cost she drinks Thompson’s Decaf and says it’s nice. She has tried others, her Dad likes Tetley but she doesn’t. I drink both tea and coffee, but mainly the latter. I discovered cheap tea in B&M - made by Hyson (yet to try the black tea) and True...

Surely a lot would depend on the shape and size of the bath. Something bespoke would probably be required

Do you know the make and or model of the toilet or the flush valve? Anything printed on the flush valve?

Can you post a photo of the other side?