Search results

So a fitter not a company gave you a written quote ? Did it say on it supply & fit ? Is it planks or herringbone?

Why not use quickstep impressive laminate. Will last years. Waterproof coating on top. Less prep is needed.

It’s 1-2 days work.

You sure it’s not supply & fit ? Labour on fitting amtico herringbone we charge £30m2 plus vat so approx £630 plus vat. Supplying amtico signature approx £1500 plus vat Adhesive £65 inc vat Prep depending but a normal 5mm smoothing compound £250 / £300 plus vat

LVT flooring is it ? Which one. What’s the preparation needed ?

We had a few of them type sub floors asphalted. We filled in the voids were the timber was with ardex na and a46 rapid and then got a 20mm of flooring grade asphalt. Very popular in the north west.

You need to put down 6mm plywood 1st

For that carpet the gripper should be 4-5mm off the skirting

Always best to prime mate. Holds reduce pinholes and helps the compound flow better. You want a 4-1 mix with P131 over the sub floor

Is the adhesive solid or loose

For me Fill in holes with ardex na or A46 rapid repair then ardex DPM1c painted 2 inches on the walls as well.

If you let it tack off dry it will release. Done it a few times. Can you make a hatch.

I did mean f46 mate. Maybe use polysafe quicklay or Altro expresslay

Who is the manufacturer? You shouldn’t float any herringbone wood. All should be fixed to the sub floor?

Fball f46

You could use uzin 630 primer. Then just screed it all and no plywood.

You can use a pin leveller. I use a screeding trowel. Every bag we mix goes 3m2 ish so I know it’s about right. We use carpet underlay and spray it to the floor or sand to block it. If high we use plywood and silicone

Jigsaw to cut it or we use a exact saw No feather and 2mm screed is to thin. Needs to be 3-6mm thick. We always go approx 4-5mm

50mm nails ? For 6mm plywood ? Should be 19mm. Also make sure they are ring shanks

Fitter 2 is correct. You need to turn heating off and do a moisture test with a hydrometer Needs to be a Reading under 65% RH