Search results

Should do yes. I take it you are floating the wood floor ?

Buy the Mapei prim grip

I’d go ardex na But Mapei renovation will do. Yes prime 1st

Why not go LVT in the kitchen. 5.5mm plywood Feather finish screed 1mm LVT 2.5mm

Yes. You put 6-9mm ply under the trim so it matches the underlay height so the carpet goes in at a nice height.

Easy shim and a Z bar trim

2 sides should be male and 2 sides female ?

Scrape anything loose A 3-5mm coat of ardex na Epoxy DPM1c or similar Glue straight to that.

Also you most probably need to use an epoxy Dpm over the 1st coat of smoothing compound as that subfloor won’t have a visqueen Dpm sheet I’d guess. What year was the house built.

Lots of reasons and the main one is because it’s crap. It won’t stick properly due to being a water mix and not a latex screed. It’s not moisture tolerant which you need with that sub floor. Ardex na is the best for that type of sub floor as it’s a bag and bottle ( latex ) Others you can use...

You be better using ardex na over that now if the adhesive is solid

That subfloor won’t have a Dpm so you need to do a Dpm butty Ardex way Ardex NA DPM1c ardex Na Fball way Fball 1200 pro F77 Fball 1200 pro

2 coats uzin PE404 Grit primer Ardex CL smoothing compound

Any Dpm sheet over older then 1990 I wouldn’t risk going over it without a liquid Dpm as it will be perished in places. you don’t but any primer under a liquid Dpm unless it’s a epoxy primer. Go with ardex DPM1c or Fball F77

what adhesive did you get ?

You need a super smooth surface to bond to. A cement screed isn’t good enough and imperfections will show through the LVT. Needs to be on 3mm minimum. You need a A2 notch trowel as well to glue it. How long has the screed been down ?

If glue down ( dryback ) LVT No , you need to put a smoothing compound down. If Click LVT you should be ok. Needs a moisture test in the slab 1st though.

I’d just go 9mm plywood over the top

Ardex na

What the hell has he used ? Way too much water in that. Also has he fixed the plywood down with staples ?