Search results

I presumed (and I stress the presumed) that they are 'frost free' because they de-humidify the air in the freezer (and do not actually defrost).

Thank for that clarification. I'll take back my comments. And if that is the case I would simply change it as it makes exiting safer.

Looking at that photo, if the door is changed so it has its hinges on its left, then the door will block the corridor when opened. Never mind regulations, it will drive you nuts as you have to manoeuvre around the door with your shopping/kids/friends.

What is you budget. Cheapest equipment (that will work well for future DIY): Hammer drill (mains as is cheaper than battery drill) https://www.screwfix.com/p/titan-ttb877drh-600w-electric-impact-drill-240v/473vv Masonry drill bit set which can drill holes in concrete...

I don't think (but am not sure ) that a phone can be made to output data via the usb c port. I would use one of these in client mode along with your phone WiFi Do a search for client mode WiFi for other brands. https://www.amazon.co.uk/TP-Link-Support-Extender-UK-TL-WR902AC/dp/B00TQEX8BO/

That dimmer is "Auto-detect" So you cannot change it. Spend the money (sorry it is expensive ) and get the varilight suggested above. Try it as new and if it does not work then read how to change its settings...

Reciprocating saw with a long Bosch blade. Safer than chain saw and usable for other DIY applications. https://www.screwfix.com/p/bosch-s1531l-green-wood-reciprocating-saw-blades-240mm-5-pack/71339?

Postcrete makes concrete not mortar, it sets too fast, and perhaps worse also contains stones that will make it impossible (although I bet some have) to use as mortar. You can easily and cheaply get premixed mortar (even from Amazon!!!). Spend the £12 on the real thing...

For me I do it along the length of hedge, when it looks heavy wrap it together, drop it into bin, and pull out tarp (normally dropping some of the cuttings). Saves me using brush. Horses for courses though, works well on thus hedge, and might not use elsewhere.

Great reminder - I use a large tarpaulin to collect the cuttings, that I drag along the bottom of the hedge as I cut along the hedge. Makes collection of leaves much easier.

I took top off hedge so it is now just over 6foot tall, so I can use a long lightweight step-up to cut (the new) top of the hedge. Eg (as a random example): https://www.screwfix.com/p/werner-500mm-x-1-15m-folding-work-platform/574JJ? A one metre tall platform will have railings and be heavy...

I second random in that I would keep what you have as it is actually more secure.

Fence panel that you cut to size. https://www.wickes.co.uk/search?text=Fence+panel+

JesZZ The common and unchanged item is the TV. (The voltage regulators in computers and laptops, both in their 'brick form' and onboard, tend to be very stable and rugged. I would suggest (guess) that the TV has a short on its PCB that is occasionally putting a higher than tolerated voltage...

For spacers on uneven surfaces I have used tap rubber O rings as they can be compressed. SFK

Agree with above In my opinion Toolstation does great Foil Tape (it is Aluminium metal) https://www.toolstation.com/aluminium-foil-tape/p97723 Screwfix does terrible foil tape (it was more sellotape than metal. Sfk

Once there is a bit less rust, put a thin coating of stove black all over the outside of the stove. Stove Grate Polish https://www.amazon.co.uk/HOTSPOT-BLACK-STOVE-GRATE-POLISH/dp/B000TAQU00/

Harry good idea. Although before DOS I would put the IP address into my browser to see if the printer has a webpage showing its connection (and often ink levels).

Can you get printer to show you hat IP address it is connected to? You sometimes press a button and it does a test print saying of it is connected to router and to what IP address. Then try and get install printer to look at that IP address.

Is there a return clause that has a specific number of days? Asking incase he is delaying so you cannot ask for a refund. SFK