Search results

  1. I

    Tumble dryer rear bush advice

    I havent taken the rest of the back off but from memory im sure its just around the motor & drum. The damage to the bush is at the bottom when fitted
  2. I

    Tumble dryer rear bush advice

    I did fit that the first time so as now the perdrop is worn i thought to just replace that as the rest of it is fine
  3. I

    Tumble dryer rear bush advice

    Ive now taken it out. Model is Hotpoint Aquaris TVFM 70
  4. I

    Tumble dryer rear bush advice

    Ok I’m asking why’s it needs replacing so soon. Cheap copy or do they need changing each year. Original lasted way longer.
  5. I

    Tumble dryer rear bush advice

    When you say bearing isn’t that the grass part that Ive changed. The rear of the drum has a shaft which then fits into this bush.
  6. I

    Tumble dryer rear bush advice

    I have a Hotpoint Aquarius 7Kg tumble dryer. Two years ago I replaced the brass looking bush at the rear of the machine. I noticed say metal filings down the rear or the appliance hence changing it. I did some washing yesterday & once down I removed the washing & turned the dial around so...
  7. I

    Main Circuit breaker tripped

    Plastic light also screwed to wooden wall. Plastic on off switch. Plastic back box. Nothing metal.
  8. I

    Main Circuit breaker tripped

    So this morning I thought let’s just try & switch the breaker on first & see what happens. My plan was to then separate the 2 red wires. I switched it on & fine. I operated the light & worked fine. At that point I had left it a while & no issues So last night with the small amount of light...
  9. I

    Main Circuit breaker tripped

    Thanks. Will look tomorrow.
  10. I

    Main Circuit breaker tripped

    Ok Just I case your not around tomorrow when I reply as your put most of the day please advise the outcome. With reds separated it still does it. With reds separated it’s now fine. Thanks for your time.
  11. I

    Main Circuit breaker tripped

    Try as above. You mean separate the 2 red wires
  12. I

    Main Circuit breaker tripped

    Regarding post 10 here is the main consumer unit. The last one on the right was I believe in the middle position. I’m sure I moved it down then all the way up to the position you see now. I didn’t touch anything else.
  13. I

    Main Circuit breaker tripped

    With regards post 8 yes this one in the off position makes it trip. This is why I have left it in the off position. In the morning when it’s light I will remove the 2 red wires from the switch & separate them & advise what happens.
  14. I

    Main Circuit breaker tripped

    This consumer unit is an addition to my main in in the house. All electric now on when this light breaker is off. Previously when I switched it back on main would trip again.
  15. I

    Main Circuit breaker tripped

    As requested thanks.
  16. I

    Main Circuit breaker tripped

    There is no button. It’s just a on / off item. When you say separating do you mean remove light switch. 1 red wire in 1 choc bloc block & then the other 2 in there own choc block. Please advise thanks. Also advise what I mentioned about earth wire.
  17. I

    Main Circuit breaker tripped

    As per title main circuit breaker tripped. I reset it at main consumer unit but same again. I switched off each individual breaker if that’s what you call it. I then switched on each 1 at a time until it tripped again. I have now electric on apart from the lighting in my spare room so this...
  18. I

    Mower cable replacement & set up from scratch

    That’s what I mean. When ticking over it’s not even close
  19. I

    Mower cable replacement & set up from scratch

    That screw will make no difference as the lever that touches it isnt even close when its running. I bent back the lever of which the spring that was missing connectrs too. It now runs a lot better thanks.
  20. I

    Mower cable replacement & set up from scratch

    I assume you mean this one. Job for tomorrow.
Back
Top