Search results

Hi. Update. Ran some 1.5 twin and earth from the junction box to a 3amp fused switch then tested the end of the cable and got 240ish, what should be done with the none required earth at the fan end please? Was planning on earth sheave and a single connector block?

Hi, yes bathroom is above the kitchen, currently the bathroom floor is chipboard which I need to remove all the old grout from, hoping to use the cement boards instead of 6mm ply to level it and provide a sound platform for the click flooring.

So are cement boards OK on the floor under the vinyl click please? My boards are a little flexible with foam type stuff on one side and the harder surface on the other. Ta

Just a thought, I should fit a switch to this in the loft. What type of switch is acceptable please?

Sorry, here you go

Hi, are these backer boards suitable for fixing to my now bare stud work (plasterboard removed) for fixing the shower wall panels to please? Click meeeee

Yep, I can sort that, thanks all

I’ve found a better looking one lower down the wall which I will use instead of the other, I will leave that one be. I have bought some twin and earth 1.5mm cable which I will attach to the unction box and then up through to the loft and into the new fan, does this sound like a plan please...

Humidity sensor

I will tidy that up and whack a maintenance free box on. I should only need a live and neutral from here as I am not wiring to the light switch and the fan has a sensor on thatvwill turn it on and off. Is my plan sound please?

Yea, looks shoddy don’t it, this is how it was hiding behind the wall, probably from new build in 1995

Hi, would this junction box that serves my 2 shaver plugs (in 2 different bathrooms) provide what I need please?

Hi, what about a humidistat extractor? These seem to come on and off automatically so won’t need wiring it to the light?

Vinyl, is that like lyno? Tiles or roll?

Hi, just taken up tiles and I am going to cover the chipboard with ply, what flooring options are there nowadays suitable for an small bathroom with just a shower in please? Don’t want tiles again. Estimate size is 1.4m X 1.2m Ta

Hi, I want to cover chipboard in a bathroom so I can lyno it (or similar. How thick should the ply be please?

Hi all, Pic one is the old Gainsborough shower I am replacing, I have gone back to the stud work and plan to install backer board and wall panels with a new tray etc. Pic 2 is the new type of shower we would like to fit. Watching plumber parts videos on YouTube he uses copper piping and a...

Hi, I have a tap at the side of my house but need water ideally at the front and back, are there more permanent solutions to effectively extend to the front and back without fitting more taps or running a hose along the floor please. Ta

Can the plug hole be installed in any orientation? If I spin the rectangular tray around it will be closer to the pipe it runs into, how far does the fall need to be please?

Evening all, I have finally ripped out my old tiles and shower area (U shaped) and plan on replacing the tiles with cement board and shower panels, my existing shower tray is about 9 inches from the floor so quite a step up, what determines how low I can install the new tray please? I can...