Search results

Hello, I have poor hot water pressure and I am considering using a pump to increase flow. I have seen the Stuart Turner Techflo TP S Positive Head Shower Pumps 1.5bar & 2.0 bar. I have a conventional open vent system with tank and cylinder in the loft. The tank sits directly on top of the...

Thanks! Does this felt have a right way round to be fixed in place , that is can you put it up inside out? Do instructions come with it?

hi I have a roof with rosemary tiles. There is no roofing felt, just tiles and cement. They are origins tiles from circa 1935. The cement is starting to crumble now and drop off. A reroof is required in the future I know. In the meantime I am thinking of lining the loft with thick paper or...

Hi I have a conventional heating system with a water tank fed copper cylinder in the loft which is heated by a gas boiler. The tank sits immediately on top of the cylinder and so water pressure is poor. I have looked at thermal stores and unvented systems. I like the idea of a store more than...

Hi I am planning an extesnion off the kitchen to create a garden room. I see loads of ideas etc on the net and TV - use of large glass windows and doors etc. Thats exacttly the way I want to go. BUT my BCO has just informed me that the window cant be bigger than 25% of the new floor...

Hi I need the odd rosemary tile replacing. Its a 1930s house. Are these tiles standard size? I hope to source from a local yard. crakkers

Hi Just looking for advice as to what I can expect to pay for repointing my chimney. Its on a 3 Bed semi and its quite a low chimny, about 10 brickes high. Ball park figure required - NW england. Cheers

HI Still having problems! Pressure drops over night and often prevents CH coming on. I top up via the filler pipe so the pressure needle reads half way. Heating comes on and the pressure rises into the red. I have tied a bag to the overflow and water collects into it. Heating...

Hi Done as suggested, no water comming from outlet. Pressure dropping quicker and quicker now when CH is not on, when on pressure goes nearly into the red. Why such variance??? Crackers

Hi boiler pressure drops more often now. I have done a leak test on the rads and they appear fine. When ch comes on the pressure guage shows normal to high. When switched off it drops low and sometimes to zero. This prevents ch comming on. It only takes a day or so before I have to top it up...

Hi, every mow and then my eco tech switches off. The error code states that it has no water and the water pressure guage reads zero. I simply turn on the water fill and fill it untill the guage reads about half full. The boiler then switches on and everything is fine. Its currently happens...

thanks. so where would be best?

My cylinder is directly under the cold water feed tank with no real elevation. Hot water pressure is low. Can I fit a pump anywhere that automatically switches on when a tap is openef? Also, the cylinder has about 40mm of foam stuck to it. Someone said it also needs a jacket. True??? Crakkers

Thanks bolt on top or hidden?

Hi Any advice on removal of light cluster? Will I need to remove body panels or trim? C.

I have now switched the rad dial back up and switched CH off at the programmer

There is a thermostat strapped to the cylinder with a dial setting knob on it too. Also I noticed that I have two dials on the boiler. One with a radiator icon the other a tap. If I turn the rad dial off everything goes cold regardless of the postion of the tap dial. The rad dial needs to be...

There is a thermostat strapped to the cylinder with a dial setting knob on it too. C