Search results

  1. freddiemercurystwin

    Make hexagon with mitre saw

    Oh yeah you might be right chaps. :whistle::rolleyes::p
  2. freddiemercurystwin

    uPVC cladding Installation

    Marley Weatherboard is much nicer.
  3. freddiemercurystwin

    Make hexagon with mitre saw

    That's not the overall width, that's the diagonal width which is irrelevant and no use to the OP if he used the method described in the video.
  4. freddiemercurystwin

    Is a soakaway necessary for a patio?

    Clay - that's your problem then and a soakaway won't work, which is also why you have water not soaking down. It's doubtful a french drain will make much difference. So live with it or drain it into the mains, though strictly speaking that's not permitted.
  5. freddiemercurystwin

    Is a soakaway necessary for a patio?

    It depends, is the earth clay?
  6. freddiemercurystwin

    Make hexagon with mitre saw

    To achieve 100mm sides you start with a 200mm wide bit of wood https://www.omnicalculator.com/math/hexagon
  7. freddiemercurystwin

    Opinions on this please

    That's just an assessment of the Regs and the proposal to exclude them, this was referred to on page 1 of the thread. It might help if the OP stated whether they're under Scottish, England or Wales Regs
  8. freddiemercurystwin

    Opinions on this please

    Well the OP needs to ascertain if Building Regs apply or not, I daresay they may have been excluded, after all such bothies seemingly exist all over the country and it's doubtful many would comply with any Building Regs, so there may be certain criteria that permits them to be excluded, probably...
  9. freddiemercurystwin

    Shed doors dropping

    @crank39 @ronniecabers
  10. freddiemercurystwin

    Soundproofing?

    You can get fire door seals that double up as acoustic seals, whether they make much difference I don't know but I suspect they're little more (costly) than standard fire seals so probably worth a punt.
  11. freddiemercurystwin

    Suggestions for anchoring metal pergola

    Without giving it too much thought I would look to fixing bases direct down to the concrete slab and trim the block paving around the posts. You are likely to need some kind of spacers underneath the pergola bases to get the thing level eg washers unless your concrete base is 100% level? A link...
  12. freddiemercurystwin

    Opinions on this please

    Well perhaps not if they're excluded from needing to be compliant, at least on paper.
  13. freddiemercurystwin

    Opinions on this please

    Googling suggests they're excluded from council tax too.
  14. freddiemercurystwin

    Opinions on this please

    Having a bit of a google, it looks like there were proposals made in 2015 to make them exempt from the Scottish Building Regs but I can't see any reference with regards to England Regs or whether the Scottish proposals were enacted. Bit of a funny one.
  15. freddiemercurystwin

    Opinions on this please

    Whilst we understand and can applaud the ethos and can also sympathise, unfortunately Building Regs absolutely would apply, as would suitable insurance be necessary but if you go rogue that's your call. At least that would be my take on it.
  16. freddiemercurystwin

    Internal door locked. Lost key

    Congratulations on making your first post, you seem to have dragged up a year old thread and even then not realised the door is already in the open position.
  17. freddiemercurystwin

    Best place to buy roof windows?

    Fakro, Keylite but Velux are the best and spares are usually available many years after purchase, unlike the alternatives. Have you done a search? https://www.diynot.com/diy/search/11211386/?q=velux+alternative&o=relevance
  18. freddiemercurystwin

    arco drain needed and the quotes are in ....(can I do it myself?)

    Whilst it may be obvious we're gonna start by asking what the problems are and how the ACO will rectify things. And yes you can DIY though technically you're not allowed to connect into the sewers without approval. Maybe upload a fag packet sketch of the layout and where the problems are and...
  19. freddiemercurystwin

    How to taper a decking board

    So a diminishing gap between the boards at one end? I think that would look weird.
Back
Top