Search results

  1. C

    Hive Install to replace Danfoss TPOne - B

    Superstar . That has worked . I had 13 and 15 the wrong way round. Then once swapped I had lose connection on zone 2 so wasn't coming on. Now all working. Only slight concern is radiators don't go off completely but I think that has something to do with the hive app and frost protect sstayingon...
  2. C

    Hive Install to replace Danfoss TPOne - B

    I already have a wire in where all the brown wires are?
  3. C

    Hive Install to replace Danfoss TPOne - B

    Or is there a wire guide somewhere for a danfoss I could see which black wires go where? Online
  4. C

    Hive Install to replace Danfoss TPOne - B

    Single channel receivers. I believe my fault is in the wire box. I have three black wires two of which are from my now hive receivers and the other is going to my pump I believe from the box lable. When I move these around I now have hot radiators around the house but not my zone 2 upstairs ...
  5. C

    Hive Install to replace Danfoss TPOne - B

    So no link cable from Live to 1. And Black wire now in Position 1. And both receivers does come on and fire up the boiler. But no radiators get hot in both zones now?
  6. C

    Hive Install to replace Danfoss TPOne - B

    Thanks , this is how both have been wired .
  7. C

    Hive Install to replace Danfoss TPOne - B

  8. C

    Hive Install to replace Danfoss TPOne - B

    Yes that's correct . Just didnt want to start all over as the thread explains perfectly what i have done. Regarding the black and brown wires. When i turn my heating on the upstairs zone two comes on. Do I need to remove the link from 12 to 13?
  9. C

    Hive Install to replace Danfoss TPOne - B

    Evening , I have completed the same setup from Danfoss to Hive with multizone. Brown live Black switch 3 and grey neutral and earth. All looks good but not getting radiators hot downstairs, do I need to do anything in the wiring center ?
Back
Top