Search results

Thanks for the response, got a pair of Irwin`s ok for the money, but not over impressed a bit clunky, might get a pair of Rotherburges. Cheers all.

Could also be a build up of carbon and burnt food hitting the fan blades.

Doing a fair bit of plumbing lately, thinking of getting a good pair of 12 inch slim jaw, water pump pliers, whats the make of choice, up to about 25 quid ?

Yes you need a proper meter, not too familiar with the model quoted, but has it got a digital clock ? I have had several ovens that switch the common neutral through the clock. Clock fails, so the oven and grill, will not power up.

Does any one have any ideas why why my Whirlpool W/M keeps breaking its drum paddles, the bits that slot in the drum location slots brake off.. Must be a common problem, loads for sale on ebay.

Thanks very much, your reply is much appreciated. I want to try and recieve Amateur TV on 23 cms, from the local ATV repeater.

Can any one tell me the frequency tuneing range of a old analog Sky box. I need a Saterlite reciever that tunes 1,300 Mhz to about 13,500 Mhz.. Any idears info much appreciated

Therefore as its is 24v SELV, my interpretation of the Wiring Regs is, no earth connection is required. In any case there is no facility for a earth connection, the 24v is connected via a small jack plug.

Fitted some Street CCTV Cameras with plastic cases, on coulomb's, they are powered from a 24 volt Power supply which is is double insulated class 2. the out put feed from this is then taken to the Camera in shoot gun cable with the video. Customer claims Highway Street Furniture ECS...

Runs of for short time, then stops and starts, I can hear the relay on the PCB clicking, then stops completely, sometimes water empty light flashes. I have checked for blockages in condenser etc and the water inlet to tank is ok. What is the sensor at the front by the filter ? is that the...

Many hanks for the reply, it does make sense what you say, and I suppose a motor would be the easy way to do it.

Can some one explaine this, a friend of mine has a 3 phase lath in his workshop connected to a single to 3 phase inverter, he has trouble with the lathe motor phaseing at slow speeds and when reversing, he read in a engineering magazine that if you connected another small "slave" motor across...