Search results

  1. G

    XCELRPT PIR Question.

    Put the system into walk test. Wait 3-4 minutes before you test the PIR.
  2. G

    XCELRPT PIR Question.

    The PIR led will only work when powered up or the tamper switch is opened closed. Then the PIR will stay in test mode for approx 10 minutes. As the system is a basic one way wireless system the panel does not communicate with the PIR to transmit a set/unset status.
  3. G

    XCELRPT PIR Question.

    Ion is a one way wireless system. Once activated the pir will go into sleep mode for approx 180 seconds. After the sleep mode the detector will rearm.
  4. G

    Hikvision Poc CCTV audio

    No audio as it would need an ‘S’ in the prefix. I think.
  5. G

    Best wired alarm system

    Pyronix Euro46 for me.
  6. G

    Risco agility 2

    Looks like your stuck then :sneaky:
  7. G

    Pyronix Enforcer Keypad Menu (display blank)

    Press D enter 2000 and make sure he keypad address is 00 then press A
  8. G

    Pyronix enforcer turn off internal sounder

    Volume Control > Alarm = 0
  9. G

    Pyronix Enforcer Panel Backup Battery

    I’m no expert but from what I’ve read online; Engineers Menu - Change Timers - Siren Time The wireless version of the siren sends a polling signal to the control panel every 5 minutes. If no signal is received within 2 hours the panel will report supervision loss and the siren will activate...
  10. G

    Pyronix Enforcer Panel Backup Battery

    Hi all Hopefully a relatively straight forward few questions. What timeframe is the backup battery in the V10 panel meant to last for? Suggest replacement every 5 years If power fails and the battery becomes depleted what’s expected to happen? Will the full alarm trigger? The panel will...
  11. G

    Pryonix Enforcer Siren Issue

    No indication on the panel?
  12. G

    Pyronix Enforcer V10 Pir issue

  13. G

    Pyronix fault.

    Are these batteries affected by the cold weather as ours have gone gone faulty this morning at 2am!
Back
Top