Search results

ok thanks for that.

thank you. the battery in at the moment is only 2Ah

ok powered it down got it working battery knackered swollen so I need new on where do you buy them from ?.

where you get the battery from also?.

no never replaced the battery how you down power the panel ? pull fuse then remove front screws then remove battery clip? would my code still work ?.

hi just had power cut for three hours anyway back on now however lost chime from the front door and keypad not responding ?. its lit up ok so are the pirs which work when you activate them and there's power to main board any idears please?.

mates been round reset panel re programed it and got our own code now so well chuffed £20 . many thanks for the reply's cheers lads .

it was pir cable repaired using telecom connectors like gel things the virgin chap was was here at the time . phone mate who's a spark said I might have crashed the board and will come over tomorrow night just blue light flashing out side all night.

all lights on key pad blue light outside tamper light on key pad too also which ever button I press just get error sound.

reconnected key pad quiet but tamper lights on with zone 3 flashing which ever button I press get error chime ?. btw had to put blown fuse back in as well to quieten panel . and blue light flashing on bell box too .

pic is in my album for you to see.

right checked fuses with a tester one had blown put it and main panel started making the noise as well this didn't happen before couldn't silence anything so pulled fuse out etc tried 1234 4321 etc nothing worked

tried it and tried to set alarm just buzz noise like error will post pic tomorrow tanks for the help so far .

ok will do tomorrow thanks for replying how I get the door chime back on by the way since I disconnected the battery its gone off ?.

by eye tbh any idea which one might be the culprit they are so fine . there are three spare one in side the panel I noticed .

page 14 on my installation book is 1.5 commissioning the system (initial power up ) and 1.6 servicing the sytem .

if I press 1234 the four zones light up on key pad but wont set but none of the pirs flash when I walk past them.

also no pirs flashing however upon reconnecting keypad I can enter 1234 and 4 red zones light up but will not set ? also the door chime alert has gone mrs wants that back if anyone can help. and the outside strobe is flashing red and green . anyone around with what to do im at a loss .

right everything wired up checked fuses seems ok pulled off battery cable outside alarm goes off . left it five mins put back battery cable key pad counts down then keypad goes off ?. enter 1234 or 4321 nothing carries had to resort to pulling black wire out from key pads to quieten.

i dont know if this is significant but before this dissaster when ever i turned power off or had a power cut the alarm never went off either outside or at keypad ? as ive said never ever set the alarm before just would like to if i can get it up and running and change the code to one we can...